Stainless Steel Special Gas Filter

Stainless Steel Special Gas Filter

【1】Customizable Stainless Steel Special Gas Filter, Stainless Steel Sterilizing Filter
Introduction to Stainless Steel Main Pipeline Filter, Stainless Steel Oil-Water Separation Filter:
The stainless steel oil-water separation filter is a pressure filtration device. The raw liquid flows into the filter bag inside the device through the inlet, is pressurized, and the qualified product permeates the filter bag, discharged from the outlet to enter the next process, while impurity particles are captured by the filter bag. The entire process is simple, and replacing the filter bag is convenient, with almost no material consumption.
Stainless Steel Oil-Water Separation Filter:
1. Large processing capacity, compact size, high dirt-holding capacity.
2. Based on the working principle and structure of the bag filtration system, replacing the filter bag is convenient and fast, and the filter requires no cleaning, saving labor and time.
3. Low probability of filter bag leakage, ensuring strong filtration quality.
4. The bag filter can withstand higher working pressure, with low pressure loss and low operating costs.
5. The filtration accuracy of the filter bag continues to improve, currently reaching 0.5μm.
6. The bag filter has a wide range of applications, suitable for various solid and liquid filtrations, flexible to use, with multiple installation methods.
Stainless Steel Compressed Air Sterilizing Filter
Interface: G1 Capacity: 1.5M³/min
Interface: G1 Capacity: 1.5M³/min
Interface: G1-1/2 Capacity: 1.5M³/min
Interface: G1-1/2 Capacity: 1.5M³/min
Interface: DN50 Capacity: 1.5M³/min
Interface: DN65 Capacity: 1.5M³/min
Interface: DN65 Capacity: 1.5M³/min
Interface: DN80 Capacity: 1.5M³/min
Interface: DN80 Capacity: 1.5M³/min
Interface: DN100 Capacity: 1.5M³/min
Filter Bag Material: Special filter bags; oil filter bags, oil-absorbing bags, activated carbon filter bags
Note: When selecting the model, choose the filter bag material according to the filtration temperature.
Applicable Materials: Paint, beer, vegetable oil, cosmetics, chemicals, petroleum products, textile chemicals, photochemicals, electroplating solutions, milk, mineral water, hot solvents, latex, industrial water, sugar water, resin, ink, industrial wastewater, fruit juice, edible oil, waxes, etc.
▽ Main Performance
◆ Filtration Accuracy: 0.22μm and above, falling under microfiltration
◆ Filtration Efficiency: 99.9999%
◆ Flow Rate: ≥5Nm³/min (0.1Mpa pressure, 0.01Mpa pressure difference 10")
◆ Steam Sterilization: Based on actual usage, steam temperature <140°C, 30 minutes/session. After 100 steam sterilization cycles or when the filter element pressure difference reaches 0.07~1.0MPa, replace the sterilizing filter element.
◆ Pressure Resistance: 0.2Mpa (forward pressure difference)
◆ Initial Pressure Drop: 0.005Mpa
◆ Length: 125mm (5"), 250mm (10"), 500mm (20"); Diameter: 70mm
◆ Filtration Area: 0.32m² (5"), 0.65m² (10"), 1.3m² (20"); Filtration Medium: PVDF membrane
◆ Inner and Outer Support: Heat-resistant polypropylene
▽ Features of the Sterilizing Filter
◆ The sterilizing filter adopts a cross-suspended design with horizontal inlet and outlet. Multi-core filters can be designed as floor-standing models.
◆ Airflow Direction: From outside to inside through the filter element.
◆ Compressed air entering the sterilizing filter must pass through at least three stages of precision filters and dryers. Remove oil, water, and dust; oil mist concentration should be ≤0.01PPM, otherwise, it will affect the lifespan of the sterilizing filter element and the expected sterilization effect.
◆ Regular sterilization: Based on actual usage, once or twice per week or month, 30 minutes each time, using clean saturated steam with a filtration accuracy of 1μm. Steam temperature <140°C, steam pressure <0.3MPa, 30 minutes/session. After 50 steam sterilization cycles or when the filter element pressure difference reaches 0.07~1.0MPa, replace the sterilizing filter element.

Welcome to call for detailed information!